Image

Item description

Buddy

Valid
until

Buddy
price

Normal
price

During my CNY holiday, finding a free time to build my 1st homemade plane. With the plan taken from www.mugi.co.uk, I start the build up by printing plan, cutting plan, cutting twinwall or impraboard, joining the parts and tada the shape is coming out.

Cutting twinwall or impraboard is actually quite easy, as recommended just use a sharp cutter and you doesn’t have put to much pressure to cut. It will cleanly cut the twinwall. The tools I use is pretty simple, just small cutter and a triangle ruler.

In order to fit the wing to the plane, i made a cut but due to inexperience the cut is just too deep. There are space between the joint between wing and fuselage. I am not really sure will that effect the flying characteristics of the plane but sure enough it got more ventilation. ha2.

The electronics now is installed and after some transmitter programming, I am ready to maiden the plane.

Electronics used on the plane:
1. 3 Servos HXT900
2. Rhino 1350mAh 3S 11.1v 25C
3. 1100kv Outrunner motor
4. Simple ESC 20A

Guys if you have experience in building please share it here.

Have been eyeeing on this plane since few months. Watching the video on youtube make me so amazed on how agile is the plane and it also can fly slow as park-flyer.

While satisfying my thirst over the plane, saw this home made funjet in indonesian RC forum. So similar and identical. As shown in the picture, the person that build this plane does really have high creativity and skills. He just build the plane from the image he got on the net. I am really amazed.

I did tried to build my my home-made plane made out of styro-foam boxes, the result is disaster. Ha2. I will share it later once I test fly it. ha2.